Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Tired of the constant noise and movement from your hitch while driving? The etrailer Anti-Rattle Hitch Stabilizer is the perfect solution to keep your hitch-mounted accessories stable and quiet. Designed to fit any 2" x 2" hitch receiver with a collar, this compact device eliminates up to 98% of the rattle, giving you a peaceful ride whether you're towing a trailer, carrying bikes, or hauling cargo.
Built to last, the anti-rattle clamp features a strong and durable steel construction with a protective vinyl coating. This heavy-duty design not only ensures long-lasting performance but also prevents damage and corrosion to your hitch. Perfect for 1,600 lbs trailers or bike racks, ensuring stability and safety on every trip.
No need to fuss with complicated setups. The etrailer Anti-Rattle Hitch Stabilizer offers a bolt-on installation that’s straightforward and hassle-free. Just place the stabilizer plate on the receiver, position the U-bolt, and tighten it with the included 17 mm wrench. You’ll have a solid, clank-free setup in just a few minutes, ready to hit the road with confidence.
Whether you're driving a 2015 Chevy Silverado, a Jeep, or a GMC Acadia, this stabilizer fits effortlessly into multiple hitch configurations. Flip it upside down for tight spaces or use it with an adapter for smaller racks. Its versatile nature ensures it adapts to different hitch setups without compromising on noise reduction.
Beyond noise reduction, the rubber-dipped coating provides a secure grip and eliminates metal-on-metal contact. It adds a layer of protection to both the hitch and the stabilizer, enhancing your transportation experience with reduced wear and tear. A practical addition that not only calms rattles but can also deter theft.
Embark on long journeys or quick trips with newfound peace of mind. This stabilizer is not just about stopping noise—it’s about giving you a secure, vibration-free ride that enhances fuel efficiency by minimizing hitch movement. Whether you're navigating busy highways or cruising through quiet backroads, this device keeps your setup steady and reliable.
California residents: click here
Washers weak. Nuts loosen in use. Frequent tightening deforms the flimsy washers. They aren't stout enough or large enough to completely cover the access holes and withstand the pressure required to secure the nut. Nylon lock nuts would be better than the current washer/lock washer setup.
This stabilizer has really helped with the occasional shifting of the hitch inside of the hitch housing. I use it to secure my camper to my vehicle and it has stopped the bouncing and odd noise. Works very well. Be sure to really snug it up to make it most effective.
I misplaced my first anti rattle hitch stabilizer and i ordered a second one. I highly recommend this product. It is very sturdy. It is easy to install and uninstall. I do not hear any rattle noise when using this product! This is an excellent product.
This stabilizer works great! Once tightened down there's no rattle or movement at all, this is actually my second one ,the first one I had for 5 years or so but I somehow got it crossthreaded and the bolt broke while forcing it back off .I didn't think twice about getting another because they work so well.
It is not nearly as heavy duty as other as I have purchased. And the description didn’t give me much to go on. Had I known it was lighter duty I would’ve never purchased it.
Works well to stop the slop in the hitch attachment. Sorry, I installed it upside down, so the etrailer logo doesn’t show.
Hi, yes, hooked it up and while carrying my motorcycle which weighs 385 lbs no noise what so ever!
I love it!
Thanks so much…
Not crazy about the yellow (painted it black). It works well, but I did have to tighten it after a 120 mile round-trip with my 5x8 Enclosed trailer fully loaded with audio equipment.
Bought these because of another review stated they would cut down on wobble of a hitch mounted carrier, i have to say i am disappointed in performance for the price but the cheaper ones were out of stock would not recommend
I love the concept of this product, however there is not enough clearance between the bumper and the trailer hitch to use on our 2025 Jeep Wrangler Sahara. Unfortunately we will have to continue useing shims to quiet the trailer hitch noise. I rate the product, not the application of it.
Doesn't fit Tundra or Tacoma tried to modify it to fit my receiver but to no avail Also does it fir EZ hitch levelers
Solidly built. Easy install. Stabilizes the carrier on the back of my Travel Trailer. I like that it can be installed without removing the carrier from the receiver.
Bill D.
5/5/2021
I have transferred it to a new fifth wheel. It’s still working great. No rattles and it stabilizes the carrier with my generator and e- bike mounted on it thus reducing the bounce load on the hitch.
This worked extremely well! I had to modify the install because of my hitch/bumper. Even with the nuts down (used some loctite) they didn't budge when pulling a square-drop trailer across back roads in Wyoming Wind River range. In fact, I lost the nut off of the ball hitch and not this stabilizer! Would definitely recommend.
The device is fine for a light weight application. Device works when it is well tightened. Ubolt is too small in diameter. Device would not inhibit hitch looseness when used on a cargo carrier with weight of 250 lbs.
This works well on my Jeep Grand Cherokee with the factory hitch receiver, several other styles required grinding away part of the chain hook plate in order to mount correctly.
Works wll . Fit hitch and deletes the r attle
Be sure this will work on your style of hitch. We have the OEM // factory installed (integrated) tow package on our 2020 Toyota Highlander and we have to install it upside down to make it work. Also, the yellow rubberized part only lasts for 1-2 uses before it is cracked // split and no longer functional.
I have a cargo basket on the back of my suv. I liked it but in addition to the rattle it would sway left and right. I use this vehicle daily and this item was the single most important part of the set up. If you don’t get one, your missing out on stable, quiet operation with your hitch receiver. It’s great!
Looks good but found the nut size for a deep socket (which you'll need) is 17mm not 3/4" as I was told by etrailer during a "live" chat.
This Anti Rattle Hitch Stabilizer was easy to
Install and solved the ball mount rattle noise
problem I was experiencing . The design made
more sense than other products available to
correct ball mount rattle noise .
So glad that I made this purchase.
This thing is very overpriced. I bought it thinking it would be better than a 15 dollar Amazon one. Not so, the ubolt is much smaller and no larger washers are provided. It also didn’t arrive on time for my trip as advertised. Don’t get me started on the “wrench” that’s included. lol. Save your money.
Quality parts, great service, reasonable prices.
This is an absolute must for a bike rack. I carry two bikes on the back of my 5th wheel and needed something to minimize rack movement. I Love the simplicity but I love the powder coat finish and vinyl covering.
Do you have a question about this Hitch Anti-Rattle?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Phillip
7/7/2025
Still works great.